Moving an On the QT Phonebooth within a Building

Knowing they way people use facilities constantly change, many customers will want to redesign their floorplans to better meet the needs of those who work there, Orangebox designed our On the QT phonebooth to be easily moved to make executing floorplan changes simple and easy. The process to move an On the QT phonebooth from Orangebox consists of the following steps. 

1. Unplug the power cord from the building power source. 
2. Remove the front and rear exterior cladding on the unit 
3. Locate a pallet jack and roll it underneath the phone booth entering from the back of booth. 
4. Raise the pallet jack to lift the unit high enough get the feet on the base off the floor. 
5. Using the pallet jack, roll the booth into its new location within the building.  
6. Lower the pallet jack and remove it from the under the phonebooth 
7. Re-level the unit using the adjustable feet on the base of the booth 
8. Re-install the cladding removed in step 1 
9. Plug the phonebooth into building power

After completing the nine steps above, the OTQT booth should be ready to use!