Required Tools for Pod Installation

This article lists the standard tools required for installing Orangebox Pods. Using the correct tools is critical for installer safety, proper fit, and damage prevention during installation.

⚠️ Installer Responsibility

• All installers must use the approved tools listed below
• Improper tools may cause product damage or personal injury
• Glass handling tools are mandatory when working with glass panels

Glass Handling Tools

Glass Suction Cups

Used for safe lifting, positioning, and alignment of glass panels.

C.R. Laurence PGL‑11 Plate Glass Lifting Tool

Heavy‑duty glass lifting tool designed specifically for plate glass handling.

Fastening & Adjustment Tools

T‑Handle Hex Keys

• 2.5 mm
• 3 mm
• 4 mm
• 5 mm
• 6 mm

Used for installing and adjusting pod hardware components.

Torque Wrench with No. 5 Allen Head

• Required torque setting: 14 Nm (10.3 ft‑lb)

Critical for proper fastening and compliance with installation specifications.

Positioning & Support Tools

Pry Bar

Used for minor alignment adjustments during base and frame positioning.

Trigger Clamp

Used to hold components in position during alignment and fastening.

Glides (for Moving Pods)

Temporary glides used to reposition pods without damaging flooring.

Level

Used to verify that base tracks and frames are square and level.

Finishing & Trim Tools

CRL 11" Vinyl Roller Tool

Used for seating tapes, seals, and vinyl components evenly.

IMAGE_URL_image_0ukZ1MB8d5p7ICJjLqP_Ng==

ABN Premium Auto Trim Removal Tool Kit

Non‑marring trim tools used to remove covers and panels without damage.

Summary

• All listed tools are required for standard pod installation
• Glass handling tools are mandatory for safety
• Torque‑controlled fasteners must always be used where specified

This Zendesk article is intended as an installer reference and does not replace official installation manuals.