Air3 Actuator Reset Instructions

Here is the easy 4 step process (done for each actuator):

1. Disconnect the actuator arms from the louvers
2. Have the Pod turned on and the roof set to open
3. Press and hold the Green Power button at the bottom of the actuator (you need to hold this for about 2 mins as this will turn the motor all the way to closed and then back all the way to open – it turns very slow so just wait as long as you have to for it to finish, when you do this the button labeled status right above the green power button will turn to yellow while it is resetting)
4. Once the motor has finished rotating and stopped you can reattach the arms to the louvers and test to make sure the roof will close all the way.

If that doesn’t work please reach out to us.support@orangebox.com