Overview

This article provides a service parts reference for Orangebox Kink™ architectural divider assemblies. Use the exploded-view diagram and itemized tables below to identify replacement panels, headers, structural components, leveling glides, and installation hardware.

All tables include the corresponding Item Number shown in the exploded-view drawing to simplify field identification and replacement part ordering. 

Exploded View Reference

Use the item numbers shown below when identifying replacement components.

Applies To

The following Kink™ configurations:

• OB1CDK01L
• OB1CDK01R
• OB1CDK02L
• OB1CDK02R

Several components are specific to left-hand or right-hand configurations and to either the CDK01 or CDK02 product styles. Verify the model before ordering replacement parts.

Structural Components

The side beam serves as the primary structural member supporting the Kink assembly.

Outer Panels

Note: Outer panels are finish-specific and may require finish selection when ordering.

Installation Hardware

These kits provide the attachment hardware required to secure the Kink assembly.

Leveling Components

The leveling glide allows adjustment and stabilization of the installed assembly.

Upper Panels

Note: Upper panels are finish-specific and may require finish selection when ordering.

Header Assemblies

These header assemblies provide upper structural support and alignment for the Kink configuration.

Lower Panels

Note: Lower panels are finish-specific and may require finish selection when ordering.

Inner Panels

Note: Inner panels are finish-specific and may require finish selection when ordering.

Complete Service Parts List

Ordering Guidelines

Before ordering replacement components:

1. Verify whether the configuration is Left Hand (L) or Right Hand (R).
2. Verify whether the product style is OB1CDK01 or OB1CDK02.
3. Locate the damaged component in the exploded-view diagram.
4. Identify the corresponding Item Number.
5. Match the Item Number to the appropriate service parts table above.
6. Confirm finish selections when ordering panel components.